Products > Concrete and rock hydraulic splitters > Concrete and Rock Splitters

Concrete and Rock Splitters

Product number : Éclateurs de Roches et Béton Hydrauliques

Manufacturer : Elco International Inc.
Many contractors find they can reduce costs, save time and make demolition work profitable using the hydraulic splitting method. Hydraulic splitting means controlled demolition. As the direction of breaks can be determined, concrete can be cut in sections as large as your equipment can handle. Hydraulic splitting eliminates both shocks and vibrations associated with large impact tools.

Some - Demolition - Applications


  • Bridge Decks
  • Bridge Abutments
  • Retaining Walls
  • Concrete Walls
  • Floor Slabs
  • Reinforced Concrete
  • Foundations
  • Wall Openings
  • Brick and Rock Walls
  • Culverts
  • Locks
  • Dams
  • Road Barriers
  • Underwater Demolition
  • Sidewalks
  • Curbs
  • Most types of Rock
  • Machine Blocks


Accessories:
  • Enlarging feathers to extend cracks.
  • Lubricant packed in 1/2 and 1 pint cans to lubricate plug and feathers.
  • Flow bar to run extra splitters off one pump.
  • Pressure gauge to check pump output and all components.
  • Drill steel sized for each cylinder.


Rentals:

Do you want more details on Hydraulic splitting ? Call us or write to us for your free copy of a booklet on Hydraulic Splitting.

Visit Elco's web site http://www.elco.com/splitter.htm, for more information and pictures of splitters in action.

Contact us for expert advice, on the use of hydraulic splitters and  accessories and to see how you can minimize labor cost while doing a better job.


Download the technical sheet Informations request


Technical details

      
DARDA CYLINDER SPECIFICATIONS
Model #9 #12  
Weight 50 lbs.  68 Lbs.
Overall length 40"     50 3/4"
Maximum expansion .78"  .75" - 1.87"
Size hole required 1 3/4"  1 3/4"
Minimum hole depth 18"  26"
Maximum splitting force 220 Tons  385 Tons
       
ELCO PUMP SPECIFICATIONS
Model Gasoline 01 Air 02 Electric 03
Weight 78 lbs. 70 lbs. 74 lbs.
Height 21 1/4" 19 1/4" 24"
Width 18" 18"    18"
Depth 12 1/2" 12 1/2"    12 1/2"
Oil capacity 5 Gal. 5 Gal.    5 Gal.
Motor 3.75 h.p. B & S gas engine Air Motor requires 50-80 cfm at 100 P.S.I.    3450 RPM, 115 Volts at 20 Amps & 220 Volts at 10 Amps.

Website design & development by HPJ